Here are models of Sagem Printers the drivers of whom we have. Currently we have 20 (735.10 MB) drivers for 10 devices in category 'Sagem Printers'. Installing SAGEM Drivers and DLL’s Wen running SAGEM with Softwin3 you need to install some software and dll files for the SAGEM readers to work on the Softcon software. This will allow you to enroll finger prints and then to download the finger print templates to the SAGEM readers. The drivers can be located on the Softcon CD or you can.

The wikis are now using the new authentication system.
If you did not migrate your account yet, visit https://idp-portal-info.suse.com/

Şuraya atla: kullan, ara

Package Wishlists:Base - Development - Drivers - Emulation - Eyecandy - Games - Mobile Computing - Multimedia - Network - Productivity - Science - Various - Packages that were already there

Package	Description	License	wanted by	remark
3Ware RAID Driver	New Source Driver for 3Ware RAID Controller cards on 32 & 64bit systems.	NON OSI	users	Much needed driver for 3Ware users.
3Ware RAID Driver	New Source Driver for 3Ware RAID Controller cards on 32 & 64bit systems.	NON OSI	users	Much needed driver for 3Ware users. If the installation CD/DVD does not contain this new driver at installation time, it becomes almost impossible to configure and use this controller as a bootable system drive.If possible, allow this driver to be a built-in kernel driver as well as a kernel module at kernel config time.
Adds pata support	Patch to enable the pata part on several sata drivers	GPL	users, server admins	Please add this patch to the list of kernel patches. I would like it to be able to use the hdd's i hooked to the extra ata controller on my asus k8v se deluxe mainboard. -- Al
Patch1Patch2Patch3 Adds sata hotplug support	Patch to enable device hotplug in sata drivers	GPL	server admins	Please add this patch to the list of kernel patches. There are 3 Patches by Lukasz Kosewski to integrate this functions into libata and the sata_promise driver. A short test on SUSE Linux 10.1 Alpha4 and a own build of a 2.6.15-4 kernel-src-rpm showed the patches work. -- HK
Aiptek Tablet Driver	The latest CVS of aiptek tablet drivers.	GPL	users	Much needed driver update for both xorg and linux kernel, and SaX2 support. The one which ships with open/SUSE10 is in the normal kernel and xorg release, but these are out of date and work poorly (eg. no pressure-sensitivity, odd absolute of screen, locks the cursor up in The Gimp/Krita) as well as next to no support in SaX2 (the serial-based hyperpen module for aiptek/aldi is supported but the usb-based aiptek ones which use the aiptek module instead are not). Good functionality with this tablet is in dying need. The unified-package is out of date but the CVS contains working drivers.
ATI	Drivers for ATI cards.	NON OSI	users	Much needed driver for ATI users to make life easier. We will not ship any non GPL kernel modules and not offer any download solutionvia YOU. Most developers of the kernel community consider non-GPL kernelmodules to be infringing on their copyright. Novell does respect thisposition, and will no longer distribute non-GPL kernel modules as part offuture products. Novell is working with vendors to find alternativeways to provide the functionality that was previously only availablewith non-GPL kernel modules. (aj) For now use the ATI Installer HOWTO to install this driver. (sndirsch)
Broadcom Ethernet NIC Driver	Broadcom Ethernet NIC Driver	GNU	users, servers	Driver for Broadcom's NetXtreme cards, this driver is need for new hardware where the current driver provided in SuSe 10.0 doesn't support. This now appers to be fixed in SuSe 10.1 Beta 3
Broadcom HPNA Hybrid Driver from Linksys	Driver for PCI hpna cards with BCM4210, BCM4211 and BCM4413 chipsets	?	users	Linux Hybrid network device driver for the Broadcom BCM4210, BCM4211 and BCM4413 PCI InsideLine Home PhoneLine Networking chips. Its a beta driver available from Linksys. Its been in beta for a long time, however I think its stable from what I've read. There are people who still run HPNA networks, like myself. Readme says the latest version of the kernel it was tested on was 2.4.3. I dont think this driver applies to USB or PCMCIA devices (as they exist), only PCI devices. -- Tokar
Comedi	Linux Control And Measurement Device Interface	GPL v2	Spoonny	Drivers for data acquisition. Get sources from CVS repository to build this package on recent kernel (tested on kernel version 2.6.13). -- Spoonny
Canon Pixma Driver	Driver for Canon Pixma printers	users	Canon Japan have made RPM packages, and they can de found on ftp://download.canon.jp/pub/driver/bj/linux/ there are drivers for other canon printers as well, and I have found this guide to install them, http://ubuntuforums.org/showthread.php?t=38995 , but I have to ignore som dependences, because SuSE 10 have new liberies. the driver works ok, but it vil be very nice if it can be included in the SuSE installation. --Emand
Conexant	Drivers for conexant access runner xDSL modems.	GPL	users	Drivers for dsl modems that have Conexant's access runner chip. Urgently needed! Many ISP bundle with new subscriptions usb dsl modems that are based on Conexants access runner chip. Fortunately however there is a GPL driver in http://sourceforge.net/projects/accessrunner and some guidelines to configure it with linux in http://www.zullinux.it/linux/accessrunner.html . Can anybody build the kernel so that the next distro will support these boxes? Thank you.
hsfmodem	Drivers for softmodem with conexant chip	no GPL	users	Usefull in many laptops. The free version of the diver is limited to 14.4Kbps (it's not a great speed but it works!)
cdemu	Kernel module to simulate CD drives + CD with cue/bin files	GPL v2	users operating with CD images	a very usefull tool because creating images can already be created and burned by k3b, but mounting them cue/bin is not that easy. [see KCDemu in the KDE Wishlist, too]
Drivers for Linksys Wireless Cards	Drivers for WMP54GX Wireless PCI Adapter SRX.	users	Supports a new Wireless Card of Linksys Seems that Linksys Wireless Cards are not supported in the new Kernel. It would be nice, when Linksys Cards were supported in the next Kernel Version.
Eagle USB	Drivers for Sagem and Comtrend modems based on eagle-usb chipset.	GPL	users	Much needed driver for Spanish, French, Polish and German users, and more users that don´t use linux because they aren´t able to connect itself to the network. Why is this driver then not in the mainline kernel. This would make us automatically pickup. -Msmeissn
EPSON device drivers for Linux	Drivers for many EPSON devices such like printers, scanners and all-in-ones'.	GPL?	users	These drivers are needed to get some new printers, scanners and all-in-one devices running under Linux e.g. EPSON STYLUS PHOTO RX700. --Richard Kraut
foo2zjs	foo2zjs is driver for ZjStream protocol printers	GPL	users	foo2zjs supports a wide range of ZjStream based printers: Minolta magicolor 2200/2300/2430 DL and HP LaserJet 1018/1020/1022. Though HP LaserJets require firmware files (under copyright), these can be simply fetched with a script from foo2zjs home site.
HP Scanjet 2400C	Driver for HP USB scanner 2400C	users	Not sure if it is yet available but either HP or the people mentioned in the SANE page could help. --Manuel Lemos
HP Scanjet 3770	Driver for HP USB scanner 3770	users	The installation procedure is quite complicated for most users, an rpm that makes the works would be appreciated.
ipw-firmware	Firmware binaries needeed for ipw2100/ipw2200 wlan cards aka Centrino	non-GPL?	laptop u

Drivers Sagem Printers